SoundOff Flashback Solid State Taillight Flashers

SoundOff Flashback Solid State Taillight Flashers alternately flashes the brake lights and the reverse lights at 2.4 flashes per second. Alternating red and white lights create an effective rear warning signal to greatly reduce rear end collisions. This is a 12 wire module with isolating diodes for the reverse wire that is required for compatibility with many new cars and trucks. Provides an additional output for deck lights. Long lasting, reliable 100% Solid State design. Potted in a durable and non-corrosive ABS plastic housing. For use with vehicles that have the negative post of the battery connected to the chassis of the vehicle. These taillight flasher systems are designed to offer you the best protection available at the most critical moments on the job.

Features:

• 12 wire module with isolating diodes for the reverse wire that is required for compatibility with many new cars and trucks.
• For use with vehicles that have the negative post of the battery connected to the chassis of the vehicle.
• Alternately flashes the brake lights and the reverse lights at 2.4 flashes per second.
• Provides an additional output for deck lights.
• Alternating red and white lights create an effective rear warning signal to greatly reduce rear end collisions.
• Long lasting, reliable 100% Solid State design.
• Available Models:
  • ETFBSSN-P Flasher w/ 12 wire leads (18 in. wire length)
  • ETFBSANFL Flasher w/ AMP Connector & Fleet Harness (6 in. wire length - harness wire length is 18 in.)
• Easy to install into tight spaces with smaller housing.
• Potted in a durable and non-corrosive ABS plastic housing.
• Size: 4.70' L x 2.05' W x .70' H.

SoundOff 5 Year No Hassle Warranty