Whelen CenCom Sapphire Siren and Light Control System

The Whelen CenCom Sapphire Siren and Light Control System delivers what you have been asking for in a sleeker, tougher, and more advanced design. CenCom Sapphire adds an integrated WeCan serial port for connecting your Whelen WeCan series lightbar directly to the Amplifier Control Module. No more bulky wires and secondary boxes to contend with. Just plug in and go! Indicator LEDs have been added to each output creating a simple, highly visible way to facilitate troubleshooting shorted or broken connections in your vehicle's wiring. Fuses and connections are easily accessible without having to use any tools or remove any covers. All high current outputs are fused for your convenience. New, heavy-duty power and output connectors can handle rough treatment without damage or accidental disengagement and are easily accessible on the front face of the Amplifier Control Module. Connections have been consolidated into fewer connector housings, saving time and space. Configuration programming is easier than ever with newly redesigned CenCom Sapphire software. CenCom Sapphire retains the highly regarded simplicity of our previous CenCom software, with new features and added flexibility; including the ability to configure your Whelen WeCan lightbar! This is a Special Order item. Special order items are non-cancelable, non-returnable, and non-refundable. All sales for special order items are final. Features: Control your warning lights, siren and Traffic Advisor functions from a single keypad. Two models to choose from for compatibility with Traffic Advisors. CCSRN3: operates Whelen 2-wire Traffic Advisors that do not require external controls. CCSRNTA3: operates Traffic Advisors that do require external controls. Solid-state outputs: one 40-Amp, two 20-Amp, four 10-Amp, and four 250-milliAmp. Relay output: one 10-Amp Dry Contact Relay. Lightbar: 1 Phoenix style connector for a WeCan series lightbar. Integrated Traffic Advisor connection on CCRSNTA3. Inputs: four positive or ground activated inputs, including a horn ring input. Easy to configure using the included CenCom Sapphire Windows application. Configured programs may be extracted, modified and stored for ease of service and reuse. A USB port on the Amplifier Control Module provides easy access for programming. The control head does not need be connected for programming. Easy to operate standard control head with bail bracket mount 4-position slide switch, 18 programmable, backlit rubber push-buttons which allow for simple warning light and 'Hands-Free' siren operation. Each button is individually customizable for numerous button types (Press on/Press off, momentary, etc). Control head backlighting can be easily turned on or off for high visibility on patrol or blacked out for discrete night operations. Brightly backlighted push-buttons include over 230 standard function labels to choose from. Rugged, aluminum-housed Amplifier Control Module is field-serviceable with easy access to fuses and connections. Operates one or two 100-Watt siren speakers. Unidirectional Public Address microphone with plug-in connector and 20 foot microphone cable are included. Includes all pigtails and connectors. Rugged CAT-5 cable connects the control head to the Amplifier Control Module. Meets or exceeds all applicable SAE, California Title XIII and NFPA requirements with various Whelen speakers Specifications: General Input Voltage........................12.5VDC +/- 20% (negative ground only) Main Input Current................80 Amps Max. Standby Current...................100mA Operating Temp....................-30C to +60C Storage Temp.......................-40C to +70C Humidity................................99% (Noncondensing) Siren/Amp Module Wail .......................................725 to 1600 Hz 12 cycles/min. Yelp .......................................725 to 1600 Hz 180 cycles/min. Piercer ..................................725 to 1600 Hz 800 cycles/min. Hi/Low ...................................550 to 650 Hz 60 cycles/min. Airhorn ..................................Composite Constant Audio Bandwidth ...................@ 25 Watts, 300 to 10000 Hz +/- 3db Distortion ..............................@ 25 Watts @ 1KHz, 1% Maximum Output Voltage ......................@ 15VDC @ 11ohms, 24Vrms Maximum Speaker Impedance ..............5.5 Ohms Minimum Outlet Current Outlet #1 ...............................40 Amps Max. (fused) Outlet #2 ...............................20 Amps Max. (fused) Outlet #3 ...............................20 Amps Max. (fused) Note: Total of Outlets 1, 2, 3 not to exceed 50 Amps. Outlet #4 ...............................10 Amps Max. (fused) Outlet #5 ...............................10 Amps Max. (fused) Outlet #6 ...............................10 Amps Max. (fused) Outlet #7 ...............................10 Amps Max. (fused) Outlet #8 ...............................10 Amps Max. (fused) Note: Total of Outlets 4 – 8 not to exceed 50 Amps. Outlet #9 ...............................0.25 Amps Max. (fused) Outlet #10 .............................0.25 Amps Max. (fused) Outlet #11 ..............................0.25 Amps Max. (fused) Outlet #12 (horn relay) ..........0.25 Amps Max. (fused) Whelen Five Year Warranty on the Complete CenCom System