Are you a member? Please log-in.  |  Not a member? Register.  |  Have you forgotten your password?  |  Wish List 0  |  
Sirennet SNLBL2 LED Lightbar
Sirennet Price $950.00
part# SNLBL2

With options:
Price $950.00

Most lightbar installations will require a mounting kit. Buy one below.

 Your Cart: 0 items

Your cart is empty!

Product Literature
Installation Sheet

The Sirennet SNLBL2 Lightbar offers front, rear and all bar operation control, fifty-two flash patterns, alley lights, take-downs, and pattern override feature. This lightbar uses standard Gen3 lighthead modules with removable optic spreading filters and the corner modules have 6 Gen3 LEDs each. Comes with Gen3 LED Take-Downs and Alley Lights. This lightbar is very serviceable. To service lightbar in the field, simply remove four screws to access any section of the lightbar. Replace any lighthead by removing one screw and single connector. Black polycarbonate base on an extruded aluminum platform. 50 inches long, 12 inches wide and only 2 1/4 inches high (without mounting feet). Clear outer lens standard with a moisture resistance compression fit gasket. Standard passenger side cable.


  • 4 - 6 Gen3 LED Corner Modules.
  • 14 - 3 Gen3 LED Inboard Modules.
  • 2 - Gen3 LED Take-Downs.
  • 2 - Gen3 LED Alley Lights.
  • 52 Standard Flash Patterns.
  • Pattern Override.
  • Size: 50" L x 12" W x 2.25" H.

Available Color Configurations:

  • All Amber

Factory 5 Year Warranty

Note: This lightbar's style and specifications are subject to change without notice.

Choose the vehicle's make:
  Chrysler, Dodge, Jeep, Ram
  GM, Chevrolet

Price $61.75 | part# SPTK
  • <-- Select Vehicle Make

Sirennet SNLBL2 LED Lightbar
Your Price: $14.95
part# 83-0115

The AFS Heat Shrink Gasket is a Single Entry Lightbar Cable Seal with Heatshrink Gasket Assembly. Perfect for sealing the hole in the roof of a vehicle where the cable goes through. No need to use silicone or wonder if the seal will hold, our Lightbar gasket is 4-1 heat shrink! 

Technical Data:

  • Fast Shrinkage upon heat application above 120° C.
  • Continuous operating temperature range from -55° C to 135° C.
  • Meets or exceeds standard specifications for Cable Entry Seals – ASTM F1837M.
  • Flame Retardant with a flammability rating of non-burning – ASTM D-635.
  • NEMA category 4X rated.


L: 1.25", ID: 0.75", Hole: 1"